Medit i500 Manual Del Usuario página 12

3
Image Acquisition Software Overview
3.2.2 Installation Guide
⑤ It may take up to several minutes
to finish the recommended
installation process. Please do
not shut down the PC
until installation is completed.
⑦ If the scanner is connected, please disconnect the scanner from the PC by removing
the USB cable.
12 User Manual
⑥ After installation is completed,
we recommend restarting the
PC to ensure optimal program
operation.
4
Maintenance
4.1 Calibration
The calibration process is essential in producing precise 3D models.
You should perform the calibration process periodically.
Calibration is required when :
▪ The quality of the 3D model is not reliable or accurate as compared to previous
results.
▪ Environmental conditions such as temperature has changed.
▪ Calibration period has expired.
You can set the calibration period as detailed in Menu > Setting > Calibration
Period(Days)
The calibration panel is delicate component. Do not touch the panel directly.
When the calibration process does not perform properly, check the panel. If
the calibration panel is contaminated, please contact your service provider.
We recommend performing the calibration process periodically.
You can set the calibration period via Menu > Setting > Calibration
Period(Days).
The default calibration period is set to 14 days.