Compliance With Standards; Ec Conformity Declaration - pizzato FOG124 Manual Del Usuario

Level of coding acc. to EN ISO 14119:
Safety parameters:
MTTF :
D
PFH :
D
DC:
Mission time:
Operating temperature:
articles ST D••••MK:
articles ST D••••N•:
articles ST D••••H•:
installation
articles ST D••••M•:
installation
Storage temperature:
Vibration resistance:
Shock resistance:
Pollution degree
8.3 Power supply electrical data
8.3.1 Power supply electrical data
Rated operating voltage U :
e
Supply voltage tolerance:
Operating current at U voltage:
e
minimum:
with all outputs at maximum power:
Rated insulation voltage U :
i
Rated impulse withstand voltage U
imp
External protection fuse:
Overvoltage category:
8.3.2 Electrical data of IS1/IS2/I3/EDM inputs
Rated operating voltage U :
e1
Rated current consumption:
Switching time EDM state (t ):
EDM
8.3.3 Electrical data of OS1/OS2 safety outputs
Rated operating voltage U :
e2
Output type:
Maximum current per output I :
e2
Minimum current per output I :
m2
Thermal current I :
th2
Utilization category:
Short circuit detection:
Overcurrent protection:
Resettable internal protection fuse:
Duration of the deactivation impulses at the safety outputs: < 300 μs
Permissible capacitance between outputs:
Permissible capacitance between output and ground: < 200 nF
Response time (tr ) after deactivation of inputs IS1 or IS2:
I
Response time (tr ) after actuator removal:
A
8.3.4 Electrical data of O3 signalling output
Rated operating voltage U :
e3
Output type:
Maximum current per output I :
e3
Utilization category:
Short circuit detection:
Overcurrent protection:
Resettable internal protection fuse:
8.3.5 Actuation data
Assured operating distance S :
ao
Assured release distance S :
ar
Rated operating distance S :
n
Rated release distance S :
nr
(A) = with SM D•T, SM L•T, SM G•T actuators; (B) = with SM E•T actuators
Repeat accuracy:
Differential travel:
RFID transponder frequency:
Max. switching frequency:
Minimum distance between two sensors:

8.4 Compliance with standards

EN ISO 14119, IEC 61508-1, IEC 61508-2, IEC 61508-3, IEC 61508-4,
EN ISO 13849-1, EN ISO 13849-2, EN 62061, EN 60947-5-3, EN 60947-5-2,
EN 60947-1, EN 61326-1, EN 61326-3-1, EN 61326-3-2, EN IEC 63000,
ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI 300 330-2, UL 508, CSA 22.2 No.14
8.5 Compliance with directives
Machinery Directive 2006/42/EC,
EMC Directive 2014/30/EU,
Radio Equipment Directives 2014/53/EU,
RoHS Directive 2011/65/EU,
FCC Part 15.
high with SM •1T actuators
low with SM •0T actuators
4077 years
1.20E-11
High
20 years
-25°C...+70°C
-25°C...+70°C, fixed installation
-5°C...+70°C, flexible installation
-25°C...+70°C fixed, flexible, mobile
-25°C...+70°C, fixed installation
-15°C...+70°C flexible,
-25°C...+85°C
10 gn (10...150 Hz) acc. to IEC 60068-2-6
30 gn; 11 ms acc. to EN 60068-2-27
3
24 Vdc
SELV/PELV (articles ST D•••0••)
12 ... 24 Vdc
SELV/PELV (articles ST D•••1••)
-15% ... +10% of U
(articles ST D•••0••)
n
-30% ... +25% of U
(articles ST D•••1••)
n
40 mA
700 mA
32 Vdc
: 1.5 kV
1 A type F
or equivalent device
III
24 Vdc (articles ST D•••0••)
12 ... 24 Vdc (articles ST D•••1••)
5 mA
500 ms
24 Vdc (articles ST D•••0••)
12 ... 24 Vdc (articles ST D•••1••)
PNP type OSSD
0.25 A
0.5 mA
0.25 A
DC-13; U =24 Vdc, I =0.25 A
e2 e2
Yes
Yes
0.75 A
< 200 nF
typically 7 ms, max. 12 ms
typically 80 ms, max. 150 ms
24 Vdc (articles ST D•••0••)
12 ... 24 Vdc (articles ST D•••1••)
PNP
0.1 A
DC-12; U =24 Vdc, I =0.1 A
e3 e3
No
Yes
0.75 A
(A) (B)
10 mm 16 mm
16 mm 27 mm
12 mm 20 mm
14 mm 23 mm
≤ 10 % s
n
≤ 20 % s
n
125 kHz
1 Hz
50 mm
9 SPECIAL VERSIONS ON REQUEST
Special versions of the device are available on request.
The special versions may differ substantially from the indications in these operating
instructions.
The installer must ensure that he has received written information from the support
service regarding installation and use of the special version requested.
10 DISPOSAL
At the end of service life product must be disposed of properly, according to the
rules in force in the country in which the disposal takes place.
11 SUPPORT
The device has been created for safeguarding people's physical safety, therefore in
mobile
case of any doubt concerning installation or operation methods, always contact our
technical support service:
Pizzato Elettrica Srl - Italy
Via Torino, 1 - 36063 Marostica (VI)
Telephone +39.0424.470.930
E-mail tech@pizzato.com
www.pizzato.com
Our support service provides assistance in Italian and English

12 EC CONFORMITY DECLARATION

I, the undersigned, as a representative of the following manufacturer:
Pizzato Elettrica Srl - Via Torino, 1 - 36063 Marostica (VI) – ITALY
hereby declare that the product is in conformity with whatever prescribed by the 2006/42/
EC Machine Directive. The complete version of the present conformity declaration is
available on our website www.pizzato.com
Marco Pizzato
DISCLAIMER:
Subject to modifications without prior notice and errors excepted. The data given in this sheet are accurately
checked and refer to typical mass production values. The device descriptions and its applications, the
fields of application, the external control details, as well as information on installation and operation, are
provided to the best of our knowledge. This does not in any way mean that the characteristics described
may entail legal liabilities extending beyond the "General Terms of Sale", as stated in the Pizzato Elettrica
general catalogue. Customers/users are not absolved from the obligation to read and understand our
information and recommendations and pertinent technical standards, before using the products for their
own purposes. Taking into account the great variety of applications and possible connections of the device,
the examples and diagrams given in the present manual are to be considered as merely descriptive; the
user is deemed responsible for checking that the specific application of the device complies with current
standards. This document is a translation of the original instructions. In case of discrepancy between
the present sheet and the original copy, the Italian version shall prevail. All rights to the contents of this
publication are reserved in accordance with current legislation on the protection of intellectual property. The
reproduction, publication, distribution and modification, total or partial, of all or part of the original material
contained therein (including, but not limited to, texts, images, graphics), whether on paper or in electronic
form, are expressly prohibited without written permission from Pizzato Elettrica Srl.
All rights reserved. © 2021 Copyright Pizzato Elettrica
10/30