E N G L I S H | 9 - Carl F. Bucherer MANERO CHRONOPERPETUAL Manual Del Usuario

SET THE MOON PHASE / LEAP YEAR AND MONTH
NOTE FOR 2100
Because of this very complicated mechanism,
the watch will handle all of the date switches
without a problem until the year 2100. This
is because February 2100 has only 28 days,
rather than the 29 that would be usual in a
Press corrector A repeat-
1
edly until the "full moon"
position is shown in the
moon phase.
The full moon is completely
visible. Use a calendar to
determine the date of the
last full moon.
2 Press corrector A for the
number of days since the
last full moon.
8 | E N G L I S H
leap year. On 1 March 2100, a simple manual
date correction has to be done as a result.
Set the date: Press corrector
3
C repeatedly until the date
indicator shows 1.
Press corrector D repeatedly
4
until the current year is
shown (IIII = leap year, I = 1
year after leap year, etc.).
5 Continue to press corrector
D repeatedly until the
current month is shown.
SET DATE / DAY OF THE WEEK
WARNING
The correctors must not be used between
8:00 p.m. and 2:00 a.m. because doing so can
damage the movement.
Set the current date by
1
pushing corrector C.
Set the current day of
2
the week by pushing
corrector B.
SET TIME
In order for the date to properly move at
midnight, the hour hand must intentionally
be set to a.m. or p.m. based on the current
time.
Pull the crown until it is
1
in position 1. The small
seconds hand does not
move.
Intentionally set the cur-
2
rent time at a.m. or p.m.
by rotating the crown.
3 Push the crown back to
the initial position.
The small seconds hand
is back in motion.

E N G L I S H | 9