General Safety Instructions - Fox F28-182A Manual De Instrucciones

1. Keep the work surface clean. If the work area or surface is busy the probability of injuries is higher.
2. Do not use the machine in dangerous environment conditions. In order to prevent electric shock, do not
expose the tools to rain and do not use it in a damp area. Keep the work area illuminated. Do not use the
machine near gas or inflammable substances.
3. Connect the dust collection device. If the machine is equipped with a dust collection device, make sure that
this system is connected and correctly used.
4. Keep unknown persons and children away from the machine. All unknown persons and children must keep a
safe distance from the work area.
5. Protect yourself from electric shock. Avoid any contact with earthing surfaces.
6. Handle the power supply cable with care. Do not pull the electric cable to disconnect it from the plug. Keep
the electric cable away from heat, oil and sharp edges.
7. Use extension cables designed for outdoor use. When using the machine outdoors, use only extension
cables suitable for outdoor use, having specific indications.
8. Be vigilant. Check carefully what you are doing, have good sense. Do not use the machine if you are tired.
9. Do not use the machine if you have taken medicines, alcohol, drugs.
10. Avoid accidental starts. Be sure that the switch is on the OFF position before inserting the plug into the
socket.
11. Wear suitable clothing. Do not wear loose-sleeved garments or pieces of jewellery which may get caught in
the moving parts. For outdoor use we recommend non-slip shoes. If necessary, use headgear to cover hair.
12. Always use personal protection devices: wear protective goggles and masks in case dust or sawdust is
produced. Wear ear muffs or plugs in noisy areas. Wear gloves when handling parts with sharp edges.
13. Do not be off balance over the machine. Always keep firmly stand
14. Ask for advices to skilled and qualified people if you are not familiar with using such a machine.
15. Move away from the workbench the tools you do not use. If you do not use the tools, you must arrange them
in a dry area which is locked and away from the reach of children.
16. Do not force the machine. You can obtain better and safer results if you use the machine at the cutting
pressure for which it has been designed.
17. Use the suitable tool for the work you are processing. Do not use a small tool for an intensive job.
18. Block the piece. If possible, use C-clamps or a holder to fix the piece. It is safer than using only your hands.
19. Keep the tools in perfect conditions. Keep the tools sharp and clean to obtain better and safer results. Follow
the instructions to grease and change the accessories. Check regularly the electric cable and replace it if it is
damaged. Keep the handles and the handgrips dry, clean, unoiled and ungreased.
20. Disconnect the tool from electricity if you do not use it, before maintenance and substitution of the
accessories or tools such as blades, drills, mills, etc.
21. Move away from the workbench locking and adjustment wrenches. Get used to check if the locking and
adjustment wrenches have been removed before switching it on.
22. Check the parts of the tool to verify that there are not any damaged components. Before using the machine,
check if safety devices or any other parts are damaged in order to be sure that it works properly and that it
can accomplish the task for which it has been designed. Check that moving parts are aligned, do not stop and
are not broken. Check the assembly and any other condition that can influence the functioning of the
machine. Any damaged part or protection must be repaired or replaced by an authorised after sales centre.
Do not use the machine if the switch does not work properly.
23. Use the machine, the tools and the accessories in the way and for the purposes mentioned in this manual.
Different uses and parts can cause possible risks to the user.
24. The machine must be repaired by a qualified person. This electric tool is in compliance with local safety
regulations. The machine must be repaired only by qualified people who use original spareparts, otherwise
risks may arise for the user.
EN

GENERAL SAFETY INSTRUCTIONS

21