Noise Conditions; Unpacking - Fox F28-182A Manual De Instrucciones

The noise emitted, measured in conformity with standards EN61029, EN3744 and EN11201 is:
- Sound pressure level LpA ....................................................................................................................... 77.4 dB(A)
- Sound power level LWA ...........................................................................................................................90,4dB(A)
- Uncertainty of measurement K ......................................................................................................................... 3 dB
We recommend you to use ear protection devices.
Bandsaw noise sources are: the electric motor and its ventilation system, the belt speed reducer, the blade and the
material to be cut.
As far as motor is concerned, take care to inspect it and its ventilation system on a regular basis, making sure that
aspiration inlets are clean. Regarding the reducer, check the condition and the tension of the belt. Keep the blade
in effecient conditions, use the suitable blade according to the material to be cut, and always keep the workpiece
correctly blocked.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine safely if other
precautions are necessary. Factors that can influence actual exposure level of the user include exposure length,
environmental features and other noise sources, as for example the number of machines and operations in the
surrounding area. Besides, exposure levels can change from country to country. However, these instructions
enable the user of the machine to better evaluate dangers and risks.
Your bandsaw is delivered complete of all parts into a box. Unpack it with care, check if there are any missing or
damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency and the safety of
the tool. Contact an after sales centre to replace faulty parts.
In order that the bandsaw perfectly works you must assemble various parts, for which you can find a detailed
explanation in the following paragraphs.
We recommend you to read the assembly instructions carefully and to follow them to the letter.
Remove the protective coating of the worked surfaces with a cloth and a cleansing, as for example WD40; do not
use acetone, petrol or paint thinners.
List of parts included in the package:
- A bandsaw complete with blade (assembled)
- A workbench
- A rip fence
- A push-stick
EN

NOISE CONDITIONS

UNPACKING

26