Time&Date; Key Lock - aquatermic inverter Manual Del Usuario

Operation Instructions
No. Full Name
1 Temperature unit
2 Language
3 On/off memory
4 Time&Date
5 Beeper
6 Back light
2.5.1 Time&Date
[Operation Instructions]
At the homepage, by pressing "GEN."
"Time & Date" at this page. After that, go to the "Time & Date" setting page by pressing the OK key
.
Change the set value by pressing the Up/Down key
up window will pop up to remind if you are determined to save this setting. If so, press the OK key
. If not, press the Cancel key
upper left corner of the control.

2.6 Key Lock

This function can be activated or deactivated through the wired controller. Once it is activated,
any key operation will become ineffective.
[Operation Instructions]
At the homepage, by pressing the up and down keys
is able to activate or deactivate this function. When it is activated, any key operation is ineffective and
the key lock icon in main page and standby page will display Yes.
Displayed Name
Temp. unit Celsius/Fahrenheit
Language
On/off memory
Time&Date
Beeper
Lighted/Energy
Back light
to not save this setting. The saving setting will update at the
Range Default
Celsius
中文 /English English
On/Off
/
On/Off
Energy save
save
access to the GENERAL SET page. Then, select
. Then by pressing "Save", a pop-
simultaneously for 5 seconds, it
31
Remarks
/
/
On /
/ /
On /
"On": it always lights
on.
" E c o " : i t l i g h t s o ff
w h e n t h e r e i s n o
key operation for 1
minute, and will lights
on where there is any
key operation.