us_main.book.book Page 45 Friday, December 3, 2021 2:25 PM
• For thin cuts of meat, insert probe in thickest
side of meat.
Using the Meat Probe Feature
CAUTION
• Always use an oven mitt to remove the
temperature probe. Do NOT touch the broil
element. Failure to follow this warning can result
in severe personal injury.
• To avoid damage to the meat probe, do not use
tongs to pull on the probe when removing it.
• Do not store the meat probe in the oven.
1
Insert the probe into the food.
2
Connect the probe to the jack in the oven.
"Probe is connected" pops up in the display
and the probe icon appears at the top of the
display.
Probe icon
3
Touch an appropriate cooking mode.
4
Set the oven temperature and the probe
temperature. Scroll through the numbers on
the display or touch the number pad icon to
enter the numbers directly.
• The default probe temperature is 150 ℉ (65
℃), but can be changed to any temperature
between 80 ℉ (27 ℃) and 210 ℉ (100 ℃).
Number pad icon
Recommended Probe Guide
Recommended Probe Placement Chart
Category
Ground Meat & Meat Mixtures
5
If desired, set the delayed start time using the
same method. Touch the arrow key on the
right side of the display to see the additional
settings.
6
Touch Start. If a delayed start time has been
set, the start time appears in the display.
7
When the set probe temperature is reached,
the oven shuts off automatically.
NOTE
• Calculating a total cooking time by weight is no
longer necessary using this feature. See the
Recommended Probe Temperature Chart to set
the probe temperature.
Changing the Probe Temperature
while Cooking
1
Touch Edit in the display to bring up the Cook
Settings screen.
2
Adjust the settings as desired.
3
Touch Start.
To Stop Cooking
Touch Stop in the display, and select Yes.
NOTE
• Touch Stop in the display at any time to cancel a
cooking operation.
• To avoid breaking the probe, make sure food is
completely defrosted before inserting.
• While the meat probe mode is running,
SpeedClean does not respond.
Examples of Food
Meatloaf
Meatballs
OPERATION
Probe Placement
Insert in the thickest part
45