us_main.book.book Page 75 Friday, December 3, 2021 2:25 PM
Problem
Oven will not Self
The oven temperature is too high to set a Self Clean operation.
Clean.
• Allow the appliance to cool and reset the controls.
Oven controls improperly set.
• See the Self Clean section.
A Self Clean cycle cannot be started if oven door is open.
• Close the oven door.
Oven door does not
Oven is too hot.
open after a Self
• Allow the oven to cool below locking temperature.
Clean cycle
The control and door may be locked.
• Allow about one hour for the oven to cool after the completion of a Self Clean cycle. The
The oven is not clean
Oven controls not properly set.
after a Self Clean
• See the Self Clean section.
cycle
Oven was heavily soiled.
• Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to
Convection fan stops
Convection fan stops during a convection bake cycle. It is done to allow for more even
(On some models)
heating during the cycle.
• This is not a failure of the range and should be considered normal operation.
Displayed Time is
This means that the product has just been plugged in, or that it has experienced a
flashing (On some
power interruption.
models)
• Touch the Clock key and reset the time, or touch any key to stop the flashing.
Oven racks are
The shiny, silver-colored racks were cleaned in a Self Clean cycle.
difficult to slide (On
• Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven
some models)
Noises
Problem
"Crackling" or
This is the sound of the metal heating and cooling during both the cooking and Self
"popping" sound
Clean functions.
• This is normal.
Fan noise
A convection fan may automatically turn on and off.
• This is normal.
door can be opened when the lock
Self Clean again or for a longer period of time.
racks with the paper towel.
TROUBLESHOOTING
Possible Cause & Solution
k
is no longer displayed.
Possible Cause & Solution
75