Erase Memory; Select Language - Chauvin Arnoux DTR 8510 Manual De Instrucciones

The DTR 8510 improves the quality of measurements in the following ways:
®
„ Low noise electronics
„ Shielded electronics and cables.
„ Differential measurements to reduce common-mode effects.
„ Ratiometric calculations to reduce dynamic errors.
VT/PT
Approx Measurement Time
Uses
CT
Approx Measurement Time
Uses

4.3.7. ERASE MEMORy

1. Press the  or  key until Erase Memory appears on the display, then press ENTER.
2. Select Yes or No using  or  and press ENTER. The display will return to Erase Memory.
CAUTION: Once the memory is erased, the stored data cannot be recovered. Download the data, if desired, before the
Erase Memory function is executed.

4.3.8. SELECT LANGUAGE

1. Press the  or  key until Select Language appears on the display, then press ENTER.
2. Select a language using  or  and press ENTER. The display will return to Select Language.
The following languages are available:
„ English
„ French
„ German
„ Italian
„ Spanish
„ Portuguese
Once the language is chosen, all the menu items, error messages etc. will be displayed in this language. The configuration retains
the language if the instrument is turned OFF and then turned ON.
Fast
6.5 S
Electrically Quiet
Environment
Fast
14 S
Electrically Quiet
Environment
Figure 4-18
Figure 4-19
56
Normal
9 S
In Most Applications
Normal
16 S
In Most Applications
Slow
19 S
Electrically Very Noisy
Environment
Slow
43 S
Electrically Very Noisy
Environment