Stihl Cut-Off Machine Cart; Storing The Machine - Stihl Cutquik TS 410 Manual De Instrucciones

2
2 2
3
1
3 3
: Fit the starter cover (1) over the
studs (2)
: Tighten up the nuts (3) by hand
1
2
: Push the V-belt guard (1) into place
: Screw in the bolt (2) and tighten it
up
: Insert the water hose into the guide
in the V-belt guard (arrows) from the
shut-off cock towards the guard –
avoid tight radiuses
Continue as described in the chapter
"Tensioning the V-belt"
TS 410, TS 420

STIHL cut-off machine cart*

The cut-off machine can be mounted on
the STIHL cut-off machine cart FW 20 in
a matter of minutes.
The cut-off machine cart makes it easier
to
– repair damaged carriageways
– apply carriageway markings
– cut expansion joints
* Special accessory
English / USA

Storing the machine

For periods of three months or more
: Drain and clean the fuel tank in a
well ventilated place
: Dispose of fuel in accordance with
the regulations and having regard to
the environment
: Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
: Remove the abrasive wheel
: Thoroughly clean the machine
: Store machine in a safe and dry
place.
Keep it out of reach of children
and other unauthorized persons.
43