Motor Management - Stihl Cutquik TS 410 Manual De Instrucciones

English / USA
4
3
2
1
1
1
Replacing the air filter
Only if there is a noticeable loss of
engine power
: Undo the screws (1)
: Remove the filter cover (2) and
clean it
: Remove the main filter (3)
: Set the choke lever to T
: Remove the auxiliary filter (4) –
ensuring that dirt does not enter the
intake area
36
: Clean the filter area
: Fit a new auxiliary filter and a new
main filter
: Refit the filter cover
: Tighten down the screws
Only use Original STIHL air filters.
The high quality of these parts will
ensure troublefree operation, a long
service life for the power unit and
extremely long filter life.

Motor Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
TS 410, TS 420