Harbor Breeze 40087 Manual De Instrucciones página 10

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
4. Remove the downrod pin (EE) and downrod clip
(DD) from the downrod (A). Then partially loosen the
motor housing set screws (FF) in the yoke at the top
of the motor assembly (E).
Hardware Used
DD
Downrod Clip
EE
Downrod Pin
Motor Housing
FF
Set Screw
5. Insert the downrod (A) through the canopy (B) and
yoke cover (D). Thread the wires from the motor
assembly (E) through the downrod (A).
6. Slide the downrod (A) into the yoke of the motor
assembly (E), align the holes, and re-install the
downrod clip (DD) and downrod pin (EE). Then re-
tighten the motor housing set screws (FF).
Hardware Used
DD
Downrod Clip
EE
Downrod Pin
Motor Housing
FF
Set Screw
4
DD
x 1
x 1
x 2
5
6
DD
x 1
x 1
x 2
Lowes.com/harborbreeze
10
A
EE
FF
A
E
A
B
D
E
A
E
EE
FF