Enraf Nonius ManuXelect Manuel De Instrucciones página 29

Ocultar thumbs Ver también para ManuXelect:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
Troubleshooting
Disconnect the mains cable from the electricity supply if the all-around-operation is not working
appropriately.
Then check whether the three operation elements of the all-around-operation are in a neutral
position: the bar on the left and on the right plus the handle.
At the short-sided edge of the couch, where you
can find the small operation handle, there is a
cord that runs to the underside of the couch. Try
to follow this cord with your hand as far as
possible, till you can pull it loose carefully from
the small pin. – see the small illustration
alongside, illustration is a bottom view –.
Uncouple the cord for a moment and put it back
again. Afterwards you can connect the mains
cable with the electricity supply and bring the
all-around-operation back into use.
Expected service life
This device will remain suitable for its intended use as long as it is subjected to yearly maintenance
by a qualified service engineer as described in the service manual and the service engineer deems
the device fit for use according to specifications.
End of life
Your ManuXelect contains materials which can be recycled and/or are noxious for the environment.
Please ensure that you are well informed of the local rules and regulations regarding the
removal of equipment and accessories.
Page 13 of 16
EN109-1550750-46

Publicidad

Tabla de contenido
loading

Tabla de contenido