Using The Bike Reha With En-Track Software; General; Possibilities With En-Track - Enraf Nonius EN-Cardio Serie Instrucciones De Manejo

12 Using the Bike Reha with EN-Track software

12.1 General

The Bike Reha is an addition to the existing range of EN-Strength exercise machines. This part of the
documentation describes the use of the Bike Reha with the Track System, and gives some examples to
make it easier to understand. To use the Bike with the Track System you need to have a mastery of the
EN-Track software, because controlling the Bike Reha is very similar to controlling the EN-Strength
exercise machines. If you are unsure, consult the software help for EN-Track or the EN-Track software
manual.
12.2

Possibilities with EN-Track

Using EN-Track enables you to execute more profiles on the Bike Reha. The number of profiles
corresponds to the number of profiles you can create with the EN-Track system.
The Bike Reha can be used in an exercise profile in a random sequence, just like the EN-Strength, EN-
Free and EN-TreeP equipment.
To create a controlled training, you can select from a multiplicity of manually created training profiles. You
can enter these on the chipcard via just a few actions.
To create an exercise in the EN-Track software, select the tab EN-Cardio/Bike Reha exercises. For
further explanation, please refer to the EN-Track software manual.
6
7
8
9
Fig. 16 Chipcard-controlled training
6
7
8
9
Fig. 17 Display of an EN-Track training session
44
1 3 2
1 3 2
1. To start the training session, insert
10
the chipcard into the Bike Reha.
The exercise information will then
appear on the control panel.
Press the green start switch (1) or
start pedalling to accept the exercise.
4
5
2. The training time and the
10
resistance in W or Nm will be
displayed per series. If you are
training for heart rate (bpm), the
desired heart rate will appear.
4
5