Product Liability; Maintenance; Conclusion - Enraf Nonius EN-Cardio Serie Instrucciones De Manejo

13 Product liability

A law on Product Liability has become effective in many countries. This Product Liability law implies,
amongst other things, that once a period of 10 years has elapsed after a product has been brought into
circulation, the manufacturer can no longer be held responsible for possible shortcomings of the product.
To the maximum extent permitted by applicable law, in no event will Enraf-Nonius or its suppliers or
resellers be liable for any indirect, special, incidental or consequential damages arising from the use of or
inability to use the product, including, without limitation, damages for loss of goodwill, work and
productivity, computer failure or malfunction, or any and all other commercial damages or losses, even if
advised of the possibility thereof, and regardless of the legal or equitable theory (contract, tort or
otherwise) upon which the claim is based. In any case, Enraf-Nonius's entire liability under any provision
of this agreement shall not exceed in the aggregate the sum of the fees paid for this product and fees for
support of the product received by Enraf-Nonius under a separate support agreement (if any), with the
exception of death or personal injury caused by the negligence of Enraf-Nonius to the extent applicable
law prohibits the limitation of damages in such cases.
Enraf-Nonius cannot be held liable for any consequence resulting from incorrect information provided by
its personnel, or errors incorporated in this manual and / or other accompanying documentation (including
commercial documentation)
The opposing party (product's user or its representative) shall disclaim Enraf-Nonius from all claims
arising from third parties, whatever nature or whatever relationship to the opposing party.

14 Maintenance

The Bike Reha is largely maintenance-free. The only point you really need to pay attention to is that wear
residues from the flat belt need to be periodically removed from the large driving disc on the pedal shaft.
The surface of the driving disc can be easily reached from underneath the machine without disassembly.
After cleaning, the disc should be lightly rubbed with just one drop of oil.
To clean the membrane keyboard and the plastic housing, use only a soft, slightly moistened cloth. Do
not use scourers or detergents for this purpose. These can damage the surface or even completely
destroy it.
The warranty lapses if internal maintenance is performed by anyone who is not authorised by Enraf-
Nonius.
• Always disconnect the Bike Reha from the mains before performing any maintenance work!
• If the power cord gets damaged, de-energise the device immediately using the switch (9). Next,
remove the power cord from the socket to prevent injury.
• If general faults, fluctuations in resistance or faults in the control panel occur then stop the training
immediately and switch off the device.
• Make sure that the various adjustable parts (saddle, handlebar) are firm and tight.
• The used lever-clamp systems (for example the seat height adjustment lever) should be lubricated
with a drop of oil at regular intervals. This will ensure proper functioning
• The sadle pin of the Bike Reha should be rinsed at regular intervals and than be coated with some
Silicon spray. This will result in a smooth sadle height adjustment mechanism.
Please find out what your local rules and regulations are for the disposal of equipment and
accessories.

15 Conclusion

We hope that you have many years of enjoyable use of the Bike Reha ahead of you. We would like to
draw your attention to the other high-quality products in our assortment. If you have any questions or
would like to receive our catalogue, then please do not hesitate to contact our representative.
46