Bloom Diagnostics Bloom Lab Manual De Instrucciones página 7

1. Unpack the contents of the Bloom Lab package and check
that all components have been received (see section 5.).
2. Plug in the Bloom Lab using the provided power supply.
Wait until you see the white LED ring on the front
lighting up and turning clockwise (see section 13.1.).
3. After less than 1 minute, the Bloom Lab will show a
ready-state, indicated by the white LED ring being
permanently lit (see section 13.1.).
Step 2: Pair your Bloom Lab with your Bloom App
1. Open your Bloom App on your smartphone.
2. Log into the Bloom App.
3. Click "Add Test".
4. Tap the upper right corner of your smartphone
to the Bloom Lab (see visual N°8) or follow the
instructions demonstrated in the Bloom App.
Visual N°8: Connect your Bloom App and Lab
Information: Successful pairing is shown by the white
heart beat pattern on the Bloom Lab.
Step 3: Prepare to perform the test and collect your
sample
Follow the steps according to the Bloom Test
instructions for use.
Step 4: Analyze your retrieved sample
Warning
Using the information provided by the Bloom
System for diagnosis can lead to mistreatment
and severe consequences.
Do not use the Bloom System to diagnose or
treat medical conditions.
4-3-6-2 Bloom Lab IFU, 09.04.2020, V1.0
Caution: Place the Bloom Lab on a stable, fl at surface and
do not move the device during measurement.
Please do not expose the Bloom Lab to direct sunlight during
measurement, as this could infl uence your test results.
1. Insert the Bloom Test strip into the Bloom Lab (Visual
N°9). You should feel the Bloom Test strip lock into place.
The Bloom Lab will show a white heartbeat pattern on
the LED ring when the strip is inserted correctly.
Visual N°9: Insert Bloom Test strip into the Bloom Lab
2. While the Bloom Lab analyses your sample, the
Bloom Lab shows a spinning white loader and the
Bloom App shows a countdown-timer.
3. After approximately 10 minutes the measurement
will be completed. The LED ring on the Bloom
Lab will pulse blue light if the measurement was
successful. The Bloom App displays the measured
value together with a personalized report.
Information: For any error cases see section 13.2..
Information: If the Bloom App disconnects from the
Bloom Lab during the measurement process, the Bloom
Lab completes the measurement process and saves the
measurement value locally for a 3 hour period. If the same
Bloom App reconnects with the Bloom Lab during this
period, the saved measurement value will be sent to the
Bloom App and the Bloom Lab will subsequently delete
the measurement value and any unique identifi er of the
Bloom App. After a 10 minute period other Bloom Apps
will be able to connect to the Bloom Lab and perform new
tests, which will automatically delete your results.
Step 5: Switch off your Bloom Lab
1. Unplug the power supply from the device.
Step 6: Clean your Bloom Lab
EN
7