Service Settings; Factory Settings; Software Update - TechniSat HD-Vision 32 Instrucciones De Funcionamiento

Digital 5.1-channel amplifi er. If a programme is broadcast in Dolby
Digital sound, it will automatically be played back in Dolby Digital
format if the Dolby Digital (AC3) function is activated. If the function
is not activated you can switch on Dolby Digital sound manually.
Please refer to Section 6.4.1 in the operating instructions regarding
this.
AV copy
If this function is activated, the signals from the SCART socket will
be fed through to the other SCART socket in the chosen direction.
This allows you, for instance, to feed the signal from a DVD player
connected to SCART socket AV1 through to SCART socket AV2
so that you can record the signal using a video recorder at SCART
socket AV2.
Source autostart/autostop
Select the source that you want to trigger the autostart or autostop
function.
Autostart
If this function is enabled and your television is in standby mode,
the TV set will switch on when a signal is activated at the previously
selected source (e.g. when a DVD player switches on).
Autostop
If this function is enabled and your television is switched on, the TV
set will be put into standby mode when a signal is deactivated at the
previously selected source (e.g. when a DVD player switches off).
Picture in radio mode
This function allows you to deactivate the picture in radio mode.
This places less demand on the screen and reduces power
consumption.
Off: The picture will be switched off in radio mode after
approximately 30 seconds and will also remain off if you
switch to another radio station.
Auto: The picture will be switched off in radio mode after
approximately 30 seconds but will be switched on again
automatically for a short time if you switch to another radio
station.
On: The picture is on even in radio mode.
YUV 576/480p mode
If you want to playback signals in 576p mode or in 480p mode via
the component input (YUV), you can choose whether you want the
signals to be processed before they are displayed on-screen or
whether they should be displayed directly without further processing.
The preferred setting depends on the signal source being used and
you should make your choice based on the picture quality.
VSP: Select this setting if you want the signal to be played back
unprocessed (i.e. directly).
All manuals and user guides at all-guides.com
EN
DPS: Select this setting if you want the signal to be processed
before it is displayed on-screen.
Teletext mode
Some programme providers transmit Teletext in different Teletext
modes. Level 1.5 is transmitted as standard. Various programme
providers also support the visually more sophisticated HiText Level
2.5. You can manually set the Teletext mode in this line. Normally
you should select the HiText Level 2.5 mode.
11

Service settings

You can reset to the factory default settings at any time.
Furthermore, if the program list needs to be updated because the
programme providers have made changes, you can delete the list
completely and start a new search. Please note that after using the
delete function, you must fi rst perform a search and then copy the
channels/stations that you want from the TV list or the radio list into
the list of favourites.
> Open the main menu by pressing the Menu button.
> Now select the Settings menu item by marking it using the up/
down arrow buttons.
> Confi rm with OK.
The Settings submenu appears.
> Use the up/down arrow buttons to mark the Service settings
item.
> Confi rm with OK.
The Service settings submenu appears.

11.1 Factory settings

If you activate this function, the television is reset to its factory
confi guration, some settings are deleted and the AutoInstall
installation assistant is started.
> Use the up/down arrow buttons to mark the Factory settings
item.
> Press the OK button.
The following message appears: „All settings will be deleted.
Really restore factory settings?"
> Use the right/left arrow buttons to mark Execute or Cancel.
> Confi rm your selection with OK.

11.2 Software update

You also have the option of updating the operating software of your
TV set. If you have satellite reception, you can receive this data
channel over the ASTRA satellite systems (19.2° East). To receive
the equivalent data channel over DVB-C or DVB-T too, the data
channel must be available on your cable network or in your DVB-T
reception area.
> Use the up/down arrow buttons to mark the Software update
item.
> You can open the Software update submenu by pressing the
OK button.
> Use the up/down arrow buttons to mark the Source item.
> Use the right/left arrow buttons to select the signal source
25