Table Of Contents Of Product; Technical Features; Specifications To Assemble Your Carrier - Bobike ONE MAXI E-BD Manual

TABLE OF CONTENTS OF PRODUCT

EN
A. MAIN SEAT
B. SEAT BELT
B1. SHOULDER RESTS
B2. BELT ADJUSTER
B2.1. UPPER ADJUSTMENT BUTTON
B2.2. BELT GUIDE
B3. BELT STRAP
B4. LOWER ADJUSTMENT BUTTON
C. SAFETY BELT FOR BICYCLE FRAME
D. FOOTREST

SPECIFICATIONS TO ASSEMBLE YOUR CARRIER

CAUTION
• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• The child bicycle seat must be assembled on a carrier with a load capacity
of 27kg, according to the ISO 11243 standard.
• The maximum weight applied to the carrier cannot exceed 27kg.
• For safety reasons this seat shall only be fitted to luggage carriers in
accordance with ISO 11243 - 120 to 175 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26", 27,5", 28" and 29".
• This child bicycle seat is only suitable for carrying children with a
maximum weight of 22 Kg (and children with recommended ages ranging
from 9 months to 5 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
D1. FOOTREST STRAP
D2. FOOTREST LEVER
D3. FOOT SUPPORT PEG
F. CENTER OF GRAVITY
G. SEAT CUSHION
H. SEAT MOUNTING BASE
H1. 4 x SCREWS
H2. 4 x METALLIC CLAMPS
H3. 2 x SCREWS
H4. 4 x PROTECTIVE CLAMPS

TECHNICAL FEATURES

How and where the carrier is to be attached to the bicycle.
MAXIMUM CHILD
WEIGHT 22 kg
(48,5 lbs)
WARNING
H5.
H6.
I.
J.
K.
K1.
K2.
L.
120 - 175 mm
4.72 - 6.89 in
COMPATIBLE WITH RACKS
IN ACCORDANCE
WITH ISO 11243
NOT OK
NOT COMPATIBLE BICYCLES
CARBON REAR SUSPENSION
FIBER SHOCK ABSORBER
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for
optimum comfort and safety of the child. It's also important that the seat
does not slope forward, so that the child does not tend to slide out of it. It's
also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.
4
INSERTION OPENING FOR THE METALLIC
PROTECTION SYSTEM
ALLEN KEY NRº 5
OPENING AND CLAMPING JAW
SAFETY METALLIC DEVICE
SAFETY BUCKLE
SAFETY BUCKLE RELEASES
SAFETY BUCKLE SOCKET
TRACEABILITY INFORMATION
RACK HOLDS AT LEAST
59,5lbs ( 27 KG ) LOAD
Ø10 - 16 mm
IN ACCORDANCE WITH
Ø 0.39 - 0.63 in
ISO11243
MOTOR (MOPEDS
AND SCOOTERS)