Care And Maintenance; Cover Removal; Removing The Backrest Cover; Removing The Head Restraint Cover - Britax Parkway SG Guia Del Usuario

Care and Maintenance

Cover Removal

Removing the Backrest
Cover
1 Detach the elastic loops (6 total)
from the backrest (Fig. A).
2 Remove the backrest cover.
NOTE: Be careful not to damage the
EPS foam.
Removing the Head
Restraint Cover
1 Detach the elastic loops (6 total)
from the backrest (Fig. B).
2 Remove the head restraint cover.
Removing the Armrest
Covers
1 Detach the elastic loops (2 total) of
each armrest cover from the booster
seat base (Fig. C).
2 Remove the armrest covers.
The armrest covers are not
NOTE:
interchangeable.
24
All manuals and user guides at all-guides.com
a
b
c

Removing the Seat Cover

1 Detach the elastic loops (4 total) from
the booster seat base (Fig. D).
2 Slide the plastic retainer flaps (3
total) from the front and sides of the
booster seat base (Fig. E).
3 Remove the booster seat cover.

Cleaning the Cover

• HAND WASH, using cold water and
mild soap.
• LINE DRY, to prevent cover from
shrinking.
• DO NOT: Bleach, machine wash, or
machine dry.

Replacing the Cover

To replace the cover, reverse the steps of each section.

Cleaning the Shell

• SPONGE CLEAN, using warm water and mild soap.
• TOWEL DRY
• DO NOT: Use solvents, abrasive cleaners, or disassemble
the booster seat in any way, except as instructed.
Care and Maintenance
d
e
25