Stryker PINPOINT PC9000 Manual Del Operador página 13

The PINPOINT camera and VPI* are labeled with the following laser safety warning
labels in accordance with applicable standards:
Table 1: Warning Labels and their Locations
* The Video Processor/Illuminator used with the PINPOINT camera is a component that is shared with
the SPY Portable Handheld Imaging System (SPY-PHI System).
The user is expected to follow all precautions and warnings outlined in this manual,
and adhere to the electromagnetic compatibility (EMC) limits set out in the
electromagnetic compatibility guidance document. Failure to do so may
compromise the system's ability to maintain basic safety under abnormal EMC
conditions.
The imaging system has been certified for compliance with international standards
for EMC and is suitable for use in professional healthcare environments. The
imaging system generates radio frequency energy and should be installed and
used in accordance with these instructions to minimize the possibility of
interference with other electro-medical equipment. However, there is no guarantee
that interference will not occur in any particular installation.
If in turning the imaging system off and on, the PINPOINT System is shown to
cause harmful interference to other electro-medical equipment, the user is
encouraged to try to correct the interference by:
▪
Reorienting or relocating the PINPOINT System or the equipment receiving
the interference
▪
Increasing the separation between the PINPOINT System and the equipment
receiving the interference
▪
Connecting the PINPOINT System to an outlet on a different circuit from the
one to which the other equipment is connected
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
Laser Aperture
indicator, see
Figure 2
Front panel, see
Figure 13
7