Surround - Denon AVR-2802 Instrucciones De Operación

ENGLISH
10

SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 12) or from the remote
control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only
effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically
stored in the memory.
1
Press the T. TONE button.
T.TONE
(Remote control unit)
2
Test tones are output from
the different speakers. Use
the channel volume adjust
buttons to adjust so that the
volume of the test tones is
(Remote control unit)
the same for all the speakers.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
1
Select the speaker whose level you want to
adjust.
CH VOL
CH SELECT
ENTER
(Main unit) (Remote control unit)
The channel switches as shown below each
time the button is pressed.
FL C FR SR SB
FADER SW
When the surround back speaker setting is set
to "2spkrs" for "Speaker Configuration", this is
set to "SBR", "SBL".
2
Adjust the level of the selected speaker.
SELECT
(Main unit) (Remote control unit)
Only adjustable
when the channel
is selected with the
CH VOL buttons on
the main unit.
24
All manuals and user guides at all-guides.com
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
SELECT
MEMORY RT STATUS ON SCREEN
1,3
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
3
After completing the
adjustment, press the
T.TONE
T. TONE button again.
(Remote control unit)
B
VOLUME LEVEL
SENSOR REMOTE SIGNAL
LOCK DIGITAL
INPUT
STAND BY AUTO DIGITAL PCM
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
SL
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
1 SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
NOTES:
• The adjustment range for the different channels
is +12 dB to –12 dB.
• When using the DIRECT mode, the sound from
the subwoofer can be cut by lowering the SW
(subwoofer) setting one step from –12 dB
(setting it to "OFF").
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR and SB) together. Use it for example to adjust the balance of the sound from the different positions
when playing multi-channel music sources.
1
Select "FADER".
CH VOL
(Main unit)
The channel switches in the order shown
2
below each time this button is pressed.
FL C FR
FADER
When the surround back speaker setting is
set to "2spkrs" for "Speaker Configuration",
this is set to "SBR", "SBL".
2
Press the button to reduce the volume of
the front channels, the
volume of the rear channels.
The fader function does not affect the SW
channel.
SELECT
(Main unit)
• The channel whose channel level is adjusted lowest
2 1
can be faded to –12 dB using the fader function.
• If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values are
cleared, so adjust the fader again.
Dolby Surround Pro Logic
B
2
1
Select the Dolby Surround Pro Logic II mode.
• The Dolby Pro Logic indicator lights.
SURROUND SELECT
MODE
(Main unit)
B
CH SELECT
REMOTE
SENSOR
ENTER
STAND BY
(Remote control unit)
SR SB SL
SW
button to reduce the
1
(Remote control unit)
This is only displayed when setting the fader control.
II mode
1 3, 5 1, 4, 6
Light Display
DOLBY / DTS
SURROUND
(Remote control unit)
VOLUME LEVEL
SIGNAL
LOCK DIGITAL
INPUT
AUTO DIGITAL PCM
2 1
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0 A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
2
SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
RC-904
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
1
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
3
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
4, 5, 6
SELECT
MEMORY RT STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP