Next Level Racing GT ELITE Manual De Instrucciones página 10

support@nextlevelracing.com
)
A B
( Butt-Kicker T-Nut Locations )
A) Install 2 x T-Nuts into the bottom channel of the front Seat Slider Member for the Butt-kicker Mount Pole. Install 2 x T-Nuts
22
into the top channel of both Seat Slider members and attach Felt Pads to the bottom of the Seat Slider Members.
B) Align the holes on the Seat Slider End Plates with the threaded holes on the Seat Members. Bolt through and secure with
4 x M8 Countersunk Bolts.
)
A
23 A) Align the front seat slider assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
)
A
24
A) Align the Rear Seat Slider assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
PARTS:
) • • 6 x T-Nuts
• • 4 x M8 Countersunk Bolts
• • 4 x Sticky Felt Pads
(35mm x 40mm)
PARTS:
)
B
• • 2 x Seat Slider Ratchet Handles
Repeat
on Other
Side
) PARTS:
B
• • 2 x Seat Slider Ratchet Handles
Repeat
on Other
Side
18
25
Align the Seat Brackets with T-nuts previously installed in STEP 22.
26a
Bolt through the seat brackets and secure using 4 x M8 Bolts and Washers.
OVER-HANGING SEAT BRACKET
( )
FOR TALLER USERS
26b
Slide the front Seat Slider member backwards and align the front slots on the Seat Brackets with the
T-Nuts previously installed in STEP 22.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • Seat Brackets
PARTS:
• • 4 x M8 16mm Bolts
Repeat
on Other
Side
• • 4 x M8 Washers
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
19