Next Level Racing GT ELITE Manual De Instrucciones página 12

support@nextlevelracing.com
31b
Install 2 x T-Nuts into both the top and bottom channels of the Shifter Arm.
INSIDE VIEW
OUTSIDE VIEW
31c
Install 2 x T-Nuts into the inner channel of the Shifter Arm.
32
Align the T-nuts previously installed into the shifter arm in STEP 31b with the holes on the upper shifter arm bracket previously
installed in step 30. Bolt through and secure using M8 Bolts, Washers and Flange Nuts.
PARTS:
• • 1 x Shifter Arm
• • 4 x T-Nuts
PARTS:
• • 1 x Shifter Arm
• • 2 x T-Nuts
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
22
33
Align the T-nuts previously installed into the Shifter Arm in STEP 31b with the holes on the bottom shifter arm bracket previously
installed in STEP 29. Bolt through and secure using M8 Bolts, Washers and Flange Nuts.
34a 34a Align the curved slots on the Shifter Plate with T-nuts previously installed in STEP 31a & STEP 31c. Bolt
through and secure with M8 Bolts and Washers.
) )
A B
34b
A) Loosen the bolts securing the Shifter arm brackets to the vertical extrusions. Adjust to your desired height.
B) Loosen the Bolts securing the Shifter Plate and adjust the assembly to your desired angle. Tighten the bolts to lock the Shifter assembly in position.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 1 x Shifter Plate
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
PARTS:
• • NIL
23 23