Next Level Racing GT ELITE Manual De Instrucciones página 13

support@nextlevelracing.com
35
Align the holes on the NLR Tool Kit holder with T-Nuts previously installed in STEP 31a. Bolt through and secure with M8 Bolts
and Washers.
A: Align end-cap to
corner of extrusion.
YOUR COCKPIT IS COMPLETE
It's time to install your electronics. If you have any questions about your setup you
can contact us directly at: support@nextlevelracing.com or you can join the
community on Discord or Facebook
36
Your Setup is complete.
24 24
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
bit.ly/nlr-discord bit.ly/NLRowner
B: Depress the centre C: Finished End Cap.
of the end-cap and align
the tab to the first hole.
Then align second tab
with the second hole.
WARNING
Please do not use power tools for assembly as over tightening can damage your frame.
If in doubt consult the installation video or contact us on support@nextlevelracing.com
Please ensure T-Nuts are correctly placed within the extrusion.
Lay out and build the cockpit on a level surface.
The GT Elite is a 2 person build.
Do not force parts together.
Avoid cross threading bolts.
ASSISTANCE
ASSEMBLY
VIDEO
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
25
Video Instruction: bit.ly/nlrbuild