Next Level Racing GT ELITE Manual De Instrucciones página 9

support@nextlevelracing.com
ALTERNATE PEDAL INSTALLATION
( )
FOR SHORTER USERS
16b
Align the holes on the Upright Connection Plate with the T-Nuts previously installed in STEP 16a. Bolt through and secure with
M8 Bolts and Washers. Repeat on the other side.
) Note: Do not tighten the
A
pedal bracket until you have
your desired position.
17 A) Align the Large Pedal Plate with the T-Nuts previously installed in STEP 15a.
B) Bolt through and secure with M8 Bolts and Washers.
)
A
18 A) Align the Small Pedal Plate with the T-Nuts previously installed in STEP 15a.
B) Bolt through and secure using M8 Bolts and Washers.
PARTS:
Repeat
on Other
• • 2 x M8 20mm Bolts
Side
• • 2 x M8 Washers
PARTS:
)
B
• • 4 x M8 16mm Bolts
Repeat
on Other
Side
• • 4 x M8 Washers
• • 1 x Large Pedal Plate
) PARTS:
B
• • 2 x M8 16mm Bolts
Repeat
on Other
• • 2 x M8 Washers
Side
• • 1 x Small Pedal Plate
Note: Use line laser lines for
easy alignment.
16
PEDAL ADJUSTMENT RANGE
19
Loosen the bolts on the Pedal Plates. Adjust to your desired position using the alignment lines and tighten Bolts to lock in the
Pedal Plates.
20 Align the holes on the Pedal Adjustment Fins with the T-Nuts previously installed in STEP 01B & STEP
15a. Bolt through and secure using 2 x M8 Bolts and Washers. Repeat on the other side.
PEDAL ANGLE ADJUSTMENT
Repeat
on Other
Side
21 Position the pedal assembly to your desired angle and install 1 x M8 Bolts and Washers to Pedal
Adjustment Fins to lock in the pedal assembly at desire angle. Repeat on other side.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • 4 x M8 16mm Bolts
Repeat
on Other
Side
• • 4 x M8 Washers
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
17