Acs 810 Settings; Factory Setting; Set Unit; Set Length Of Service Hoses - Bosch ACS 810 Manual Original

en | 58 | ACS 810 | ACS 810 settings

11. ACS 810 settings

11.1

Factory setting

Menu
LANGUAGE
DATE/TIME
UNIT OF MEASURE
HOSES LENGTH

CONTRAST

GARAGE ADDRESS
FLUSHING
OIL SCALE
UV DYE
SERIAL NUMBER
EXPERT MODE
11.2

Set unit

1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "UNIT OF MEASURE" with o u and confirm
with E.
 kg/lb are displayed.
5. Select unit with o u and confirm with E.
"
Unit is set.
i
Return with <Stop>.
11.3

Set length of service hoses

1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "HOSES LENGTH" with o u and confirm with
E.
 Available lengths (2.5 m, 5 m, 7.5 m and 10 m)
are displayed.
5. Select hose length with o u and confirm with E.
"
Hose length is set.
i
Return with <Stop>.
|
1 689 989 601 2020-12-01
Factory setting
English
CET
kg/m
5 m
medium contrast
empty, no data entered
deactivated
deactivated
deactivated
Serial number has already been
entered (compare with name
plate)
deactivated
is displayed.
is displayed.
11.4 Contrast
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "CONTRAST" with o u and confirm with E.
 A numeric index is displayed on the screen indi-
cating the contrast level.
5. Adjust contrast with o u and confirm with E.
"
Contrast is set.
i
Return with <Stop>.
11.5

Enter serial number

i
The serial number is located on the rating plate on
the back of the housing of ACS 810.
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message
ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "SERIAL NUMBER"" with o u and confirm
with E.
5. Enter serial number with <A – Z>,<0 – 9> and
confirm with E.
"
Serial number is set.
i
Return with <Stop>.
11.6

Flush (optional)

i
Optionally, special accessories for the cleaning
of vehicle A/C components can be connected for
ACS 810. If these special accessories are used, this
function must be activated in the selection menu.
is displayed.
is displayed.
Robert Bosch GmbH