Sportplus SP-HT-9600-iE Manual De Instrucciones página 35

2. SAFETY INFORMATION
CAUTION PRODUCT DAMAGE
• Do not put any objects into any openings on the product.
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly quali ed persons -
improper repairs can lead to serious risks for the user. Use the product for the intended
purposes as described in the operating instructions only.
• Shield the product from spraying water, moisture, high temperatures and direct sunlight.
INFORMATION ON ASSEMBLY
• The product should be carefully assembled by a responsible adult. Ask for the assistance
of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and review
the diagram.
• Remove all packaging materials and lay out all the parts. This will give you a good
overview and simplify assembly. Shield the assembly surface from lth and scratching by
laying down suitable padding.
• Check the components against the components list to make sure all are present. Do not
dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any tools
lying around. Place the packaging materials somewhere where they will not pose any
hazards during assembly. Packaging foil or plastic bags pose a su ocation hazard for
children!
• After assembling the product according to the instructions, make sure that all screws,
bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to protect
your oor as there is no guarantee that, for instance, the rubber feet will not leave marks
behind.
• Some of the screws and nuts are self-locking. This mechanism may be damaged if they
are loosened. To ensure the screws/nuts hold tightly, check them before assembly and, if
necessary, coat them in a securing lacquer or use new self-locking hardware (available in
a building supplies store).
35