7. USING THE COMPUTER
P24 – A
Training time: 40 minutes
P24 – D
Training time: 40 minutes
Press the START/STOP button to start exercising.
•
ERROR MESSAGES
Display
Cause
E1 (ERROR 1)
The computer does not receive any position signal from the
actuator (67), or the movement of the motor has been blocked.
•
•
•
E2 (ERROR 2)
The system cannot recall the program data from the memory.
•
•
E3 (ERROR 3)
The actuator does not move to the designated position.
•
•
WARNING, RISK OF INJURY
Improper repairs can result in signi cant hazards for the user. Any repairs or replacements
must be carried out by a technically experienced person.
P24 – B
40 minutes
P24 – E
40 minutes
Check the wiring of the product for any damage or jamming.
Check the movement range of the brake for any blockage.
Please contact our customer service.
The computer must be replaced.
Please contact our customer service.
Replace the actuator.
Please contact our customer service.
52
P24 – C
20 minutes
P24 – F
20 minutes