Publicidad
Idiomas disponibles
Idiomas disponibles
10
UK
Control unit
Type
Power supply
No. of motors
Motor power supply
Flashlight
Warning light
Accessory power supply
Safety device power supply
Plug-in
Operating temperature
TECHNICAL SPECIFICATIONS / FUNCTIONS
• Red warning LEDs of N.C. contacts (CLOSING LIMIT SWITCH, OPENING LIMIT SWITCH, STOP,
PHOTOCELL 2, SAFETY DEVICE)
• Green warning LED of N.O. contact (START)
• START and CLOSE buttons on the board.
• Control of one 12 VAC electric lock.
• Safety switch test activation before the opening and closing movements.
• Stop and motion inversion for 2 seconds after intervention of the safety devices. At the next START pulse the
motion restarts in the obstacle freeing direction.
• SAFETY DEVICE POWER SUPPLY Connection to this power supply allows TESTING the devices before
motion. The safety devices must be connected to this terminal and will be powered only during the operating
cycle.
• Deceleration during opening and closing with limit switch or timed (last 5 or 10 seconds). Deceleration is
adjustable with the relative TRIMMER (SLOW)
• Photocell 1 (PHOTO 1) activates during closing only.
• Photocell 2 (PHOTO 2) activates both during opening and closing. The motion will always resume in opening
after PHOTO 2 is freed.
• Motor force adjustment with the TRIMMER TR4 FORCE.
• Input SAF DEV with 8K2 resistor connected to the safety devices. If not used connect an 8K2 resistor between
terminals 26 and 29 (present as default).
• Hydraulic motor (DIP 5 ON): if the gate has not performed any manoeuvres in the last 5 hours, a 10-second
closing pulse is given. (hydraulic lock retention)
DURING THIS MOVEMENT THE SAFETY DEVICES ARE NOT ACTIVE.
INSTALLATION
Use glands adequate to ensure proper mechanical connection of cable and maintain the box protection degree IP55.
(FIG. 5)
BA100/AS05060
Electronic control unit for automation of a swing gate,
overhead door and barrier with 230 VAC motor
220 / 230 VAC, single-phase, 50 Hz
220 / 230 VAC
220 / 230 VAC 40W max
24 VAC 3W max
24 VAC 8W max including safety device power supply
24 VAC 8W max including accessory power supply
radio receiver
-20°C +60°C
BA100
1
Publicidad
