Turning The Unit On - BluMill CM7008T-GS Instrucciones De Uso

FILLING WITH COFFEE
EN
Place selected filter on porta-filter as follows:
FOR GROUND COFFEE:
Fill the filter with fresh, fine ground espresso coffee (do not overfill).
1.
Tamp and compress firmly and evenly ground coffee.
2.
Clean any excess coffee from the rim to ensure proper fit under brew head.
3.
A B
PLACE THE PORTA-FILTER
Position porta-filter underneath the brew head, attach porta-filter by first moving
1.
retainer clip back.
Position handle so that the handle lines up with the open lock icon " " on the unit and
2.
fits into the groove.
3. Then, slowly turn it to the right until the retention clip is aligned with the closed lock
symbol " " on the unit.
A B
8
C
C
PLACING THE CUP(S)
Pull out the height adjustment tray if you are using a small "demitasse" cup to brew
1.
espresso.
Keep the height adjustment tray inside its compartment if you are using a larger cup to
2.
brew cappuccino.
Keep the height adjustment tray inside its compartment if you are using a larger cup to
3.
brew latte.
CAUTION: When brewing cappuccino or latte, please make sure to adjust the frothing tube
lever in order to position the froth milk dispensing tube inside the cup to be used.

TURNING THE UNIT ON

1. Make sure unit is plugged in.
2. Turn unit on "I".
The three control panel lights will start blinking during heating and until the water reaches
the perfect temperature. Once these lights become solid, the unit is ready to use.
SELECT THE FUNCTION
PREPARING ESPRESSO
Press the Espresso Button once to brew one single shot.
1.
Press the Espresso Button twice to brew a double shot.
2.
Press and hold the Espresso Button for 3 seconds to customize the brewing to your
3.
preference. When done, press the Espresso Button once again to stop it.
The unit will start brewing the espresso according to your selection. The unit will turn off
automatically and the lights will become solid indicating that the cycle has been comple-
ted. Your delicious espresso is ready to be enjoyed.
NOTE: To brew less coffee than the preset serving, press the function button to stop the
brewing process when the amount of coffee desired is reached.
PREPARING CAPPUCCINO
Prior to preparing your cappuccino, adjust the quantity of frothed milk according to your
preference by turning the Froth Control Knob to the right for more foam and to the left for
less foam.
Note The foam intensity can be adjusted during the brewing cycle.
Press the Cappuccino Button once to brew a small cup of cappuccino.
1.
Press the Cappuccino Button twice to brew a large cup of cappuccino.
2.
The unit will start brewing the cappuccino according to your selection. Your delicious cap-
puccino is ready to be enjoyed.
EN
9