Descargar Imprimir esta página

Set The Date; Cleaning And Maintenance; Water Resistance - Carl F. Bucherer ADAMAVI Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15

Set the date

1
Pull the crown into position 1.
2
set the current date by
rotating the crown counter-
clockwise.
En
8
Secure the crown
Important:
to ensure water resistance, the crown
must be in the initial position when the watch is
worn.
1
Push the crown back to the
initial position.

Cleaning and maintenance

cleaning:
to clean the outer surface of the watch,
wipe it gently with a microfiber cloth. use a fine
toothbrush and a bit of soapy solution to clean the
back of the watch and the metal band. Dry using a
lint-free towel. Minimize contact between the
leather straps and the water.
Maintenance:
As a mechanical instrument, a
watch requires maintenance by an authorized
service center about once every four years.

Water resistance

A watch tested to 3 atm (30 m) is resistant to
sweat, drops of water and rain. Water resistance
is guaranteed only if the crown is in the initial
position and should be checked once per year.
the binding nature of meter data:
30 m (3 atm)
Do not swim / dive
50 m (5 atm)
Bath, shower, swim
100 m (10 atm)
swim, snorkel
200 m (20 atm)
swim, snorkel, dive
300 m (30 atm)
Deep-sea diving
9
En

Publicidad

loading