Bauknecht BIK5 DP8FS2 ES Manual De Instrucciones página 14

ACCESSORIES
WIRE SHELF
The number and type of accessories may vary depending on which model is purchased. Other accessories can be
purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the baking
tray, are inserted horizontally in the same way as the
wire shelf.
FITTING THE SLIDING RUNNERS
(IF PRESENT)
Please note: The sliding runners can be already mounted on
the shelf guides: to remove them, pull outward, releasing first
the lower clip.
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the
runner to the shelf guide and
slide it along as far as it will
go. Lower the other clip into
position.
DRIP TRAY *
WWW
docs . bauknecht . eu for more information
BAKING TRAY *
REMOVING AND REFITTING THE SHELF GUIDES
• To remove the shelf guides, remove the fixing
screws (if present) on both sides with the aid of a
coin or a tool. Then, lift the guide and remove the
lower components from their seating: the shelf guides
can now be removed.
• To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating. Refit the fixing screws.
To secure the guide in place, firmly press the lower
portion of the clip firmly against the shelf guide.
Make sure that the runners can
move freely. Repeat these steps
on the other shelf guide on the
same level.
Please note: The sliding runners can
be fitted on any level.
Download the Use and Care Guide from
SLIDING RUNNERS *