Publicidad
Idiomas disponibles
Idiomas disponibles
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking by pressing
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
pause it. The cooking time set does not include preheating.
The temperature you want the oven to reach can always be
changed using the knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the knob to set a new cooking time and
press
.
. AUTOMATIC FUNCTIONS
TEMPERATURE RECOVERY
If the temperature inside the oven decreases during a
cooking cycle because the door is opened, a special
function will be activated automatically to restore the
original temperature. While the temperature is being
restored, the display will show a "snake" animation
until the set temperature has been reached.
While a programmed cooking cycle is in progress, the
cooking time will be increased according to how long
the door was open in order to guarantee best results.
. SPECIAL FUNCTIONS
AUTOMATIC CLEANING - PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories from the oven before
activating the pyro function.
If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off
while running the self-cleaning cycle.
For optimum cleaning results, remove excessive
residuals inside the cavity and clean the inner door
glass before using the Pyro function.
Only run the Pyro function if the appliance contains
heavy soiling or gives off bad odours during cooking.
Access special functions
.
select
from the menu. Then press
selection.
Press
to activate the cleaning cycle immediately, or
turn the knob to select the short cycle (ECO).
Press
to start the cleaning cycle immediately, or
press
to set the end time/delayed start.
At the start of the cleaning cycle, the door will be
locked automatically.
The oven door cannot be opened while pyrolytic
cleaning is in progress. It will remain locked until the
temperature has returned to an acceptable level. Air
the room during and after running the Pyro cycle.
Please note: The duration and temperature of cleaning cycle
cannot be set.
. KEY LOCK
To lock the keypad, press and hold
seconds.
Do this again to unlock the keypad.
Please note: The key lock can also be activated during
cooking.
For safety reasons, the oven can be switched off at all times
by pressing and holding
and turn the know to
to confirm
for at least 5
.
Publicidad
