Preparation For Work With Patients; Positions Of Bleaching Head - Blancone ARCUS+ Instrucciones De Uso

GB
IX. PREPARATION FOR WORK WITH PATIENTS
LED bleaching activation device BLANCONE ARCUS+ is an accessory to a medical device and is
designed to whiten hard dental tissues by photoactivation of a bleaching gel based on hydrogen or
carbamide peroxide, intended for light activation, applied in dental practice (concentrations of H2O2 or
their equivalent: 0.1 – 6% (cosmetic bleaching) or above 6% (medical bleaching).
1. Before starting work with the bleaching device, insulate the pa-
tient's non-calcified soft tissue, place a cover or protective nap-
kin on the face, apply protective UV cream and put on protective
glasses. Bleaching gel is applied to the teeth surface according to
the directions for use outlined by the gel manufacturer.
The patient should be under constant supervision by the dentist
during the bleaching process in order to avoid discomfort and to
ensure all safety and technological procedures are applied.
2.
It is desirable to check the individual sensitivity of the patient. The device has two levels of
intensity (high HI and low LO) and the optimal conditions are selected by adjusting the distance
of the device to the patient's teeth.
Testing starts with a high intensity "Hi" and a distance of 5 cm and if the heat sensation is very
strong, the distance is increased to achieve an acceptable thermal sensation.
If the acceptable distance is more than 10 cm, it is better to switch to a mode with low intensity
- "Lo" (Low) and put the bleaching head closer to the teeth to obtain optimal distance.
X. POSITIONS OF BLEACHING HEAD AGAINST PATIENT'S TEETH
CORRECT
14
Dental LED bleaching activation unit - MOBILE
5-15 cm distance
INCORRECT
TOUCH
STICK
HOME
DAY
CARE
ULTRA
DUETTO
HOME
NIGHT
DUETTO
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE