GiBiDi SR302 Instrucciones Para La Instalación página 15

SR302
Function
DIP Status
DIP 4 ON DEAD MAN
OFF
SOUND
DIP 5
FUNCTION
ON
OFF
DIP 6
IN EDGE
ON
Description
THE CONTROL UNIT IS COMPATIBLE ONLY WITH THE
Ÿ
TRANSMITTERS OF MAKO 868MHz SERIES.
In DEAD MAN operation mode the automatic closing is disabled
Ÿ
DIP2 = OFF DEAD MAN ENABLED ONLY IN CLOSING
Operation witn ONE BUTTON:
Reply to START command:
• Shutter closed
→
• During opening
→
• Shutter open
→
• After a Stop
→
Operation witn TWO BUTTONS:
Reply to OPEN command:
• Shutter closed
→
• During opening
→
• Shutter open
→
• After a Stop
→
Reply to CLOSE command:
• Closes as long as the CLOSE command is enabled, then STOPS
DIP2 = ON DEAD MAN ENABLED IN OPENING AND CLOSING
Operation witn ONE BUTTON:
Reply to START command:
• Shutter closed
→
• Shutter open
→
• After a Stop
→
Operation with TWO BUTTONS:
Reply to OPEN command:
• Opens only if it is enabled, then STOPS
Reply to CLOSE command:
• Closes only if it is enabled, then STOPS
Acoustic signal disabled
Acoustic signal enabled during the motion.
Slow intermittent sound in opening, off in pause, fast intermittent sound in closing.
Input used as Edge (N.C.), when the contact opens in closing, if «DEAD MAN IN
OPENING AND CLOSING» function is disabled, the control unit inverts the motion
up to the complete opening. The contact is irrelevant during opening.
Input used as STOP (N.C.), totally stops the motion avoiding any action.
OPENS
STOPS
CLOSES as long as it is enabled, then STOPS
movement opposed to the one before STOP, if in
closing as long as it is enabled, then STOPS
OPENS
STOPS
IRRELEVANT
OPENS
OPENS as long as it is enabled, then STOPS
CLOSES as long as it is enabled, then STOPS
movement opposed to the one before STOPS
as long as it is enabled, then STOPS
15
UK
IT