Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
MANUAL PURPOSE AND CONTENTS
TARGET
HOW TO STORE THIS MANUAL
IDENTIFICATION DATA
OTHER REFERENCE MANUALS
SPARE PARTS AND MAINTENANCE
CHANGES AND IMPROVEMENTS
ENGLISH
2
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Advance in case of doubts regarding the interpretation of the instructions and for any further information.
from failure to follow these instructions.
The Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances
that can cause damage to it.
The machine serial number and model name and are shown on the plate (10) placed on the frame.
Product code and year of production are marked on the same plate (Date code: A18, means January 2018).
MACHINE model ...............................................................................
PRODUCT code ................................................................................
MACHINE serial number ...................................................................
–
Moreover, the following Manuals are available:
•
Spare Parts List (supplied with the machine)
•
Service Manual (that can be consulted at any Advance Dealer)
Centers. Only original spare parts and accessories must be used.
Contact Advance for service or to order spare parts and accessories, specifying the machine model, product code and serial
number.
Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being
Any change and/or addition of accessories must be approved and performed by Advance.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Advance will not be responsible for damages coming
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
All necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Advance Service
obliged to apply such benefits to the machines that were previously sold.
INSTRUCTIONS FOR USE
Proterra™ - 33019867
revised 08/2018
09/2010
Publicidad
