LANCIA Ypsilon Serie Manual Del Usuario página 20

Positioning the handlebars
Position the handlebars on the handlebar attachment taking care to centre and adjust them correctly so they slot onto the
controls, tightening the handlebar attachment lever (tightening device between the handlebars and handlebar attachment).
Handlebar stem plate assembly/disassembly instructions for handlebar installation/removal (if necessary - optional)
Remove the handlebar stem from the top end of the handlebar attachment as follows:
Remove the screw number 1 and then the lever number 2.
Then proceed to remove the metal plate number 3 and finally
remove the metal plate number 4 by sliding it sideways.
Proceed to reassemble the previously removed handle-
bar attachment plate in the reverse sequence.
Make sure to tighten properly to avoid dangerous
situations while riding.
19