Function Description - LANCIA Ypsilon Serie Manual Del Usuario

LCD Display - CDC13-BT
Overview of controls and symbols

Function description

Display on/off
Press the ON/OFF button for at least 3 seconds to switch the display on or off.
Selecting the assisted pedalling level
Press the relevant button to increase or decrease the level of selected assisted pedalling.
There are between 1 and 5 assisted pedalling levels that can be selected (Assist).
Assist level 1 sets minimum electrical support by the motor (minimum power - ECO mode).
Assist levels 2 and 3 set intermediate electrical support by the motor (minimum power - STD mode).
Service levels 4 and 5 determine the setting of the maximum electrical support provided by the motor (maximum power -
Turbo operating mode).
If you select level 0, you exclude electrical assistance from the motor.
Enabling walk assist mode
Set the walk assist level to 0 and then, press and hold the - button to enable the walk assist mode which allows you to
activate electric motor assistance up to a maximum speed of 6 Km/h.
Disable the function by releasing the button.
CAUTION
The walk assist mode must be used in compliance with the regulations in force in the country of use and is only allowed when
pushing the electrically power assisted cycle by walking alongside the bicycle and holding the handlebar grips firmly with
both hands.
1. Indicator light for light ON
2. Assist: indicator of the assisted pedalling level selected
(number)
3. Error: malfunction warning light
4. Indicator light for walk assist mode ON
5. Digital speedometer: indicator light for speed detected
during use (Km/H or MPH)
6. AVG: display of average speed data recorded during
last use (Km/h or MPH)
7. MAX: display of maximum speed data recorded during
the last use (Km/h or MPH)
8. TRIP: display of partial distance travelled (Km or Miles)
9. ODO: display of total distance travelled (Km or Miles)
10. Travel mode corresponding to the selected assisted
pedalling level (ECO-STD-Turbo)
11. Indicator light for residual battery charge
12. M: mode button (MODE)
13. Button to vary and/or decrease value (-)
14. ON/OFF button
15. Button to vary and/or increase value (+)
24