Battery - LANCIA Ypsilon Serie Manual Del Usuario

OFF = selecting "off", confirmed by pressing the M button, excludes the user password request (identification code) to allow
the user to access and activate the display and allow full control of all the functions provided for the electrically power
assisted cycle.
The display controls and functions will be immediately accessible after pressing the ON button.
ON = by selecting the data "on", confirmed by pressing the M button, the configuration parameter is enabled which provides
for the activation of the display and access to all the functions provided for the complete management of the pedal-assisted
bicycle exclusively after entering a user password (identification code).
Display controls and functions, after pressing the ON button, will only be accessible after entering the user password previ-
ously set (P3).
P3 - User password:
Parameter only displayed after the "ON" option has been selected which allows the user to enable the display access
configuration exclusively by entering the password (numeric identification code consisting of 4 digits) previously set and
confirmed as follows:
- select the 4 digits which make up the password by pressing the + and - buttons and confirming them individually by press-
ing the ON/OFF button
- confirm the numeric identification code consisting of 4 numbers by pressing the M button.
0000 - System parameter setting password:
In the event that abnormal data relating to speed (Km/h and Km) and distance (MPH and mile) are highlighted on the display,
contact the after-sales technical assistance service to receive appropriate support: https://urbanchicemobility.it/assistenza/
The electrically power assisted cycle starts and powers its electrical and electronic functions through the lithium-ion battery
supplied with the product, correctly recharged, installed and, if provided, following activation through a specific switch.
Li-Ion Battery – Lancia Estro and Lancia Ypsilon Incanto version
A. Battery on/off switch (I=On / O=Off)
B. Charging port for battery charger
C. Residual charge status indicator
Li-Ion battery – Lancia Ypsilon Brio version
A. Battery on/off switch (I=On / O=Off)
B. Charging port for battery charger
C. Residual charge status indicator

7. Battery

26