Pacojet 2 PLUS Manual De Instrucciones página 26

EN
6.
After properly fitting the protective outer bea-
ker (12) / pacotizing beaker (10), the adjoining display
will appear on the color display (18).
In principle, the contents of the beaker can be pro-
cessed independently of the filling quantity without
portion specification.
Pressing the START BUTTON (20) will process the
entire contents of the beaker.
Portioning/quantity selection
To process a specific partial quantity of a beaker,
proceed as follows:
4
a.) Select the portioning icon (top left) using the
SELECTOR BUTTON (17 - top left).
b.) Press the SELECTOR BUTTON (17 - top left),
to define whether portions (the fully filled pacotizing
beaker contains 10 portions) and/or tenth portions
4.5 are to be processed (the entire pacotizing cup cont-
ains 100 tenths portions).
c.) The number of whole and/or tenth portions
can then be set using the ARROW BUTTONS (19).
d.) If the programmed number of servings can not
be fully pacotized due to insufficient beaker contents,
the number of remaining servings will appear flashing
on the display. In this case, the display and the pro-
gramming remain, even after removal of the protecti-
ve outer beaker and can thus be used as a presetting
for processing a second beaker for the required
portions remaining.
26