Blade Installation; Hanging The Fan - LUCCI Air AIRFUSION CAROLINA Manual De Instrucciones

Airfusion Carolina 70' Installation Instructions
•
Align the 3 mounting holes on the blade assembly (3) to the 3 mounting holes on the rotating member
of fan motor assembly (1) and using the 3 blade screws with washers (2) to secure the blade
assembly (3) to the fan motor assembly,
•
Ensure the screws are tightened equally and evenly to reduce the chance of warping or unbalancing.
Take care not to over tighten the screws as this can damage the blades.
•
Once completed, repeat the process on the remaining blades.
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.5)
6 | P a g e

BLADE INSTALLATION

Fig. 4

HANGING THE FAN

Fig. 5