TILSBERK DVISION Manual De Instrucciones página 24

11. If the display is fuzzy or hard to read, you can change the angle of the display slightly.
12. If the frame shown on the display is fully or partially outside your field of vision, remove the
DVISION module and the helmet adapter from the helmet and slightly move the helmet adapter
in the desired direction.
13. Always recheck the conditions listed in step 10 and keep adjusting the position of the helmet
adapter until all conditions are met.
You have used the adhesive pads to attach the helmet adapter with tabs to the helmet. Proceed
by setting up the DVISION app ("Installing and setting up the DVISION app" on page 33).
INFO
Shortly after mounting, the adhesive pads have not yet developed their
full adhesive power. The helmet adapter can be removed easily and then
attached again.
I N - H E LM E T I N STA L L AT I O N
EN
23