TILSBERK DVISION Manual De Instrucciones página 33

Reworking Sugru
19. Remove any Sugru that has emerged on the edges of the helmet adapter. Use a flat object to do
this, for example, a plastic card or an ice cream stick. Make sure you do not change the position
of the helmet adapter.
20. Let the layer of Sugru harden completely before you use the device. Hardening takes 24 to
48 hours at room temperature, depending on the thickness of the Sugru layer.
A 1.5 mm layer takes approx. 24 hours while a 3 mm layer takes approx. 48 hours.
You have used Sugru to attach the narrow helmet adapter to the helmet. Proceed by setting up
the DVISION app ("Installing and setting up the DVISION app" on page 33).
WARNING!
Until the layer of Sugru has hardened completely, the helmet adapter
can come loose during rides due to vibrations and shocks.
Let the Sugru harden completely before your first ride.
I N - H E LM E T I N STA L L AT I O N
EN
32