TILSBERK DVISION Manual De Instrucciones página 35

2. Tap "NEXT" and following the instructions in the DVISION app.
During setup, you will be asked to grant the following permissions to the DVISION app:
// Bluetooth: access to your Bluetooth connection is required to enable the DVISION app to
establish the connection to the DVISION module. In this context, you will also be asked to
activate Bluetooth on your smartphone if it is not already active.
// Location data: access to your current location is necessary to determine your position and
current speed.
// Phone status: access to your phone status, contacts and call lists makes it possible to show
phone notifications on the display. This permission is not strictly necessary for the DVISION app
to work. If you do not grant this permission, we cannot show call information on the display.
Once you have completed the setup, you are prompted to connect the DVISION module to the
DVISION app.
Pairing the DVISION module with the DVISION app
3. Ensure that the DVISION module is switched off and sufficiently charged, and near your
smartphone.
4. Switch on the DVISION module.
After a short time, your DVISION module appears as an available device in the DVISION app.
5. Select the DVISION module to start pairing.
6. Allow Bluetooth pairing on your smartphone. For iOS, this permission does not have to be
granted.
Once you have granted all required permissions to the DVISION
app, the DVISION app automatically switches to pairing mode.
INFO
The pairing process can take a few seconds as the device data has to be
transferred between the smartphone and the DVISION module.
O P E R AT I O N
EN
34