Descargar Imprimir esta página

Lap Belt Installation - Britax ADVOCATE Guia Del Usuario

Ocultar thumbs Ver también para ADVOCATE:

Publicidad

Idiomas disponibles

Idiomas disponibles

Britax Child Safety, Inc.

Lap Belt Installation

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
28).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat.
NOTE: Ensure that no
more than 3 in. (7.5 cm)
of the base hangs over
the edge of the vehicle
seat (see page 27).
4. Slide the vehicle belt into
the rear-facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the vehicle
belt is not twisted and
buckle the seat belt.
6. Lock and remove slack
from the vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
12
Table of Contents
1a
3"
1b

Publicidad

loading

Este manual también es adecuado para:

BoulevardClicktight