Impact Absorbing Chest Pads - Britax ADVOCATE Guia Del Usuario

2. Route the belly pad and
buckle retainer through
the buckle slot in the seat
pan cover.
NOTE: Ensure that the
buckle is through the
correct cover slot for the
desired buckle position.
3. Slide the end of the belly
pad over the seat and
(if applicable) over the
comfort foam.
4. Turn the buckle retainer
sideways and route it
into the corresponding
buckle slot in the seat.
NOTE: Ensure that the
buckle is in the correct
position and the red
release button faces
out.
5. Replace the cover,
ensuring the seat pan
cover is tucked behind
the CLICKTIGHT bar, then
close the CLICKTIGHT
door.

Impact Absorbing Chest Pads

IMPORTANT:
recommended for forward-facing mode. Removal of chest
pads is optional for rear-facing mode to ensure a snug fit
for small infants.
Removing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness release
button.
b. Pull both harness
straps forward.
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
Impact absorbing chest pads are highly
Table of Contents
1b
1a
39