Britax ADVOCATE Guia Del Usuario página 42

Britax Child Safety, Inc.
2. Adjust the harness to
the lowest position and
unhook the harness
straps from the yoke at
the back of the child seat.
NOTE: Do not pull on
the harness adjuster
strap after removing the
harness straps from the
yoke.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad,
chest pad, and the chest
clip.
5. Reroute the harness strap
back through the chest
clip and comfort pad,
ensuring that the harness
strap is not twisted.
6. Repeat for other strap.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass over
the tube.
8. Nest the end of the left
harness strap into the
right.
9. Slide the harness straps
completely onto the yoke.
Ensure that the adjuster
and harness straps are
not twisted and that
the ends of the harness
straps are securely
attached to the yoke.
IMPORTANT:
pads in a safe location when
not in use.
40
Store the chest
Table of Contents
TUBE