Lower Anchor Installation - Britax ADVOCATE Guia Del Usuario

Britax Child Safety, Inc.

Lower Anchor Installation

IMPORTANT:
a child weighing more than:
‐ ADVOCATE ONLY: 30 lbs (13.6 kg)
‐ BOULEVARD ONLY: 35 lbs (15.8 kg)
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
28).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat.
NOTE: Ensure that no
more than 3 in. (7.5 cm)
of the base hangs over
the edge of the vehicle
seat (see page 27).
4. Remove the lower
connectors from the
storage compartment (at
the rear of the seat) and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
NOTE: Verify that the
connectors are secure
and the strap is not
twisted.
10
Do not install rear facing with lower anchors for
Table of Contents
1a
3"
1b