Britax ADVOCATE Guia Del Usuario página 33

To attach the tether to a tether anchor:
1. Firmly press the hook over
the tether anchor point.
2. Pull the loose end of the
webbing to remove slack
from the tether.
NOTE: If the tether is
too short for use in your
vehicle, contact Britax
Consumer Services at
1-888-427-4829 or 1-704-
409-1699 to obtain a
tether extender.
To remove the tether from a tether anchor:
1. Loosen the tether.
a. Tilt the lock up.
b. Pull the tether
webbing.
2. Remove the tether hook
from the tether anchor.
NOTE: Store the tether in the tether compartment
when not in use and ensure the tether compartment
door is fully closed.
The Tether as a Crash Indicator
The tether can indicate when the child seat has been in a
moderate or severe crash (see "Important Notes" on page
5) and replacement of the child seat is necessary.
IMPORTANT:
involved in a moderate or severe crash, regardless of whether
the colored stitching has been ripped.
Figure 1 shows an example of
a tether when the child seat is
acceptable for continued use
(provided the child seat has not
been involved in a crash). The
colored stitching will be intact.
Figure 2 shows an example
of when the tether has been
damaged and is unacceptable
for continued use. If any of the
colored stitching has ripped,
the child seat is no longer
acceptable for use.
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
Discontinue use of child seat if it has been
1a
Fig. 1
Fig. 2
Table of Contents
1b
31