Impact Absorbing Tether - Britax ADVOCATE Guia Del Usuario

Britax Child Safety, Inc.
To remove the lower connectors:
1. Push the lower connector
adjuster release button to
loosen connector strap.
2. Push down in the seating
area and open the
CLICKTIGHT door.
3. Squeeze the lower
connector hook and lift
off the lower connector.

Impact Absorbing Tether

Failure to follow the guidelines below may cause the child
seat not to perform as intended.
• Britax recommends that the tether be used when installing
the child seat forward facing. Using the tether will improve
the stability of your child seat and reduce the risk of injury.
• Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points. Only use
the designated tether anchor for each seating position.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance. DO
NOT modify your vehicle without advice from your vehicle
manufacturer.
• Store the tether in the compartment on the back of the
child seat when not in use.
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
for tether anchor capacities
and look for the tether anchor
symbol shown in the diagram
to help identify where the
top tether anchor points are
located in your vehicle.
Using the Tether
IMPORTANT:
installations. To improve rear-facing performance of this child
seat an anti-rebound bar can be purchased at us.britax.com.
30
WARNING!
Do not use the top tether strap with rear-facing
Table of Contents